ReaGate
From CockosWiki
(Difference between revisions)
Christophe (Talk | contribs) |
|||
(13 intermediate revisions not shown) | |||
Line 1: | Line 1: | ||
- | + | {{EffectsHeader}} | |
+ | ==About== | ||
+ | [[Image:ReaGate.PNG]] | ||
- | + | ReaGate is a noise gate plug-in. | |
- | + | ==Controls== | |
+ | {{EffectsControlsCommon}} | ||
- | [[ | + | *'''Threshold (Unlabelled fader on left)''' - The input signal level at which ReaGate changes state. |
+ | *'''Envelope''' - the shape of things to come... | ||
+ | **'''Pre-open''' - When processing a recorded audio signal the plugin will "look-ahead" and, if the signal level will meet the Threshold, activate the Attack portion of the Envelope this many milliseconds early. | ||
+ | **'''Attack''' - The speed at which the gate "opens" (changes from letting through 0 to 100% of the signal) | ||
+ | **'''Hold''' - The length of time the gate will stay open after the signal drops below the Threshold | ||
+ | **'''Release''' - The speed at which the gate "closes" | ||
+ | **'''Hysteresis''' - see [[Glossary#Hysteresis|Hysteresis]] | ||
+ | *{{DetectorInput}} | ||
+ | *{{LowPass}} | ||
+ | *{{HighPass}} | ||
+ | *'''RMS size''' - The window-size for the detection. See: [[RMS-size]] | ||
+ | *'''Send MIDI on open/close, note, channel''' - To send MIDI note on and off messages for this note number and on this MIDI channel when the gate opens and closes. | ||
+ | *{{Wet}} | ||
+ | *{{Dry}} | ||
+ | *'''Noise''' - The amount of noise in the output signal. | ||
+ | *'''Preview filter output''' - Enable to listen to the detector sidechain | ||
+ | |||
+ | ==Tips and tricks== | ||
+ | ===ReaGate as Expander=== | ||
+ | Reagate is a fully functional expander. Just adjust the amount of dry signal to set the range. | ||
+ | |||
+ | ==Tutorials and links== | ||
+ | * SOS Tutorial: http://www.soundonsound.com/sos/may11/articles/reaper-tech-0511.htm (Audio: http://www.soundonsound.com/sos/may11/articles/reaperaudio.htm ) | ||
+ | |||
+ | {{EffectsHeader}} | ||
[[Category:REAPER]] [[Category:ReaGate]] | [[Category:REAPER]] [[Category:ReaGate]] |
Latest revision as of 13:01, 8 May 2011
Main Page > REAPER Documentation > Effects In REAPER > Effects
Contents |
About
ReaGate is a noise gate plug-in.
Controls
Common Controls
Move a fader to set a value or, to set a value precisely, type directly into the input box if it is not "greyed-out". Double Click a fader to return to its default value.
"Fine-tune" a value controlled by a fader by holding the Ctrl key while moving the fader.
- Drop-down list -
- + - Patch and Patch/MIDI program change link management, displays a graphic similar to this:
- Param
- 2 in 2 out - Routing. The plugin pin connector, displays a graphic similar to this:
Extra channels can be created by clicking on the +
- UI - Toggle between default and custom User Interface
- 100% Wet - The plugin is bypassed when this is checked
Plugin Specific Controls
- Threshold (Unlabelled fader on left) - The input signal level at which ReaGate changes state.
- Envelope - the shape of things to come...
- Pre-open - When processing a recorded audio signal the plugin will "look-ahead" and, if the signal level will meet the Threshold, activate the Attack portion of the Envelope this many milliseconds early.
- Attack - The speed at which the gate "opens" (changes from letting through 0 to 100% of the signal)
- Hold - The length of time the gate will stay open after the signal drops below the Threshold
- Release - The speed at which the gate "closes"
- Hysteresis - see Hysteresis
- Detector Input - This is used as a key input for sidechain applications
- Lowpass filter - A filter, which passes frequencies below this value and filters out frequencies above it.
- Highpass filter - A filter, which passes frequencies above this value and filters out frequencies below it.
- RMS size - The window-size for the detection. See: RMS-size
- Send MIDI on open/close, note, channel - To send MIDI note on and off messages for this note number and on this MIDI channel when the gate opens and closes.
- Wet - The amount of processed signal in the output.
- Dry - The amount of unprocessed signal in the output.
- Noise - The amount of noise in the output signal.
- Preview filter output - Enable to listen to the detector sidechain
Tips and tricks
ReaGate as Expander
Reagate is a fully functional expander. Just adjust the amount of dry signal to set the range.
Tutorials and links
- SOS Tutorial: http://www.soundonsound.com/sos/may11/articles/reaper-tech-0511.htm (Audio: http://www.soundonsound.com/sos/may11/articles/reaperaudio.htm )
Main Page > REAPER Documentation > Effects In REAPER > Effects