From CockosWiki

Main Page > REAPER Documentation > Effects In REAPER > Effects

Contents 1 ReaDelay (Cockos) 2 Controls 2.1 Common Controls 2.2 Plugin Specific Controls

ReaDelay (Cockos)

Controls

Common Controls

Move a fader to set a value or, to set a value precisely, type directly into the input box if it is not "greyed-out". Double Click a fader to return to its default value.

"Fine-tune" a value controlled by a fader by holding the Ctrl key while moving the fader.

• Drop-down list -
• + - Patch and Patch/MIDI program change link management, displays a graphic similar to this:

• Param
• 2 in 2 out - Routing. The plugin pin connector, displays a graphic similar to this:

Extra channels can be created by clicking on the +

• UI - Toggle between default and custom User Interface
• 100% Wet - The plugin is bypassed when this is checked

Plugin Specific Controls

A stereo delay with multiple "taps". A tap, in this context, is an almost complete copy of the Delay effect. By adding multiple taps (using the Add tap button) you can set-up multiple delays using just one ReaDelay plugin instead of having to insert the ReaDelay plugin into a track's effect chain multiple times.

• Wet - The amount of processed signal in the output.
• Dry - The amount of unprocessed signal in the output.
• Enabled - Enable or disable this tap
• Solo actve tap - Solo this tap (mute all other taps)
• Length (time) - The length of this tap's delay in ms (thousandths of a second)
• Length (musical) - The length of this tap's delay in beats
• Feedback - How much of this tap's output is fed back into the input of the effect, in effect it sets the number of echoes (repeats) for this tap.
• Lowpass filter - A filter, which filters out frequencies ABOVE this value.
• Hipass filter - A filter, which filters out frequencies BELOW this value.
• Resolution - ??
• Stereo Width - Increase or decrease the stereo "effect" of this tap
• Volume - Output volume of this tap.
• Pan - Position in the stereo mix.(unlabelled, to the right of Volume)
• Add tap - Add a tap
• Delete tap - Remove this tap
• Reset all - Reset all values to their default settings