ReaComp
From CockosWiki
(Difference between revisions)
Christophe (Talk | contribs) |
Christophe (Talk | contribs) |
||
Line 6: | Line 6: | ||
ReaComp is a full featured gate/compressor plug-in native to REAPER. The basic controls of Reacomp are: | ReaComp is a full featured gate/compressor plug-in native to REAPER. The basic controls of Reacomp are: | ||
- | '''Threshold''' - lower the threhsold to catch peaks, or delve deep into the innards of an audio signal | + | * '''Threshold''' - lower the threhsold to catch peaks, or delve deep into the innards of an audio signal |
- | + | * '''Pre-comp''' - true look-ahead compression - WOW! | |
- | '''Pre-comp''' - true look-ahead compression - WOW! | + | * '''Attack''' - from 0ms to 500ms (5 seconds!) |
- | + | * '''Release''' - from 0ms to 5000ms (50 seconds!) | |
- | '''Attack''' - from 0ms to 500ms (5 seconds!) | + | * '''Use Auto release''' - you got it ... automatic release! woo hoo! |
- | + | * '''Ratio''' - from 1:1 to 100:1 (inf) | |
- | '''Release''' - from 0ms to 5000ms (50 seconds!) | + | * '''Knee Size''' - from 0db to 24db - this will tell the compressor to either start compressing as soon as a signal goes over the threshold (0db) or start compressing after it goes over the threshold by a pre-determined amount (i.e. 1db to 24db). |
- | + | * '''Detector Input''' - this is used as a key input for sidechain applications - | |
- | '''Use Auto release''' - you got it ... automatic release! woo hoo! | + | * '''Low Pass/High Pass''' - Choose to NOT affect a certain range of the signal being compressed - very useful to avoid inadvertent bass compression |
- | + | * '''RMS size''' - this is an RMS detection function - generally, setting this value low gives more compression, and less compression when set higher. | |
- | '''Ratio''' - from 1:1 to 100:1 (inf) | + | |
- | + | ||
- | '''Knee Size''' - from 0db to 24db - this will tell the compressor to either start compressing as soon as a signal goes over the threshold (0db) or start compressing after it goes over the threshold by a pre-determined amount (i.e. 1db to 24db). | + | |
- | + | ||
- | '''Detector Input''' - this is used as a key input for sidechain applications - | + | |
- | + | ||
- | '''Low Pass/High Pass''' - Choose to NOT affect a certain range of the signal being compressed - very useful to avoid inadvertent bass compression | + | |
- | + | ||
- | '''RMS size''' - this is an RMS detection function - generally, setting this value low gives more compression, and less compression when set higher. | + | |
Here are some videos on how to use ReaComp (step by step!) | Here are some videos on how to use ReaComp (step by step!) |
Revision as of 23:25, 19 February 2007
Main Page > REAPER Documentation > REAPER Effects
ReaComp is a full featured gate/compressor plug-in native to REAPER. The basic controls of Reacomp are:
- Threshold - lower the threhsold to catch peaks, or delve deep into the innards of an audio signal
- Pre-comp - true look-ahead compression - WOW!
- Attack - from 0ms to 500ms (5 seconds!)
- Release - from 0ms to 5000ms (50 seconds!)
- Use Auto release - you got it ... automatic release! woo hoo!
- Ratio - from 1:1 to 100:1 (inf)
- Knee Size - from 0db to 24db - this will tell the compressor to either start compressing as soon as a signal goes over the threshold (0db) or start compressing after it goes over the threshold by a pre-determined amount (i.e. 1db to 24db).
- Detector Input - this is used as a key input for sidechain applications -
- Low Pass/High Pass - Choose to NOT affect a certain range of the signal being compressed - very useful to avoid inadvertent bass compression
- RMS size - this is an RMS detection function - generally, setting this value low gives more compression, and less compression when set higher.
Here are some videos on how to use ReaComp (step by step!)
http://www.reaper.fm/~pipeline/REAPERVideos/basics/7_ReaComp%20Basics%203mb.wmv
http://www.reaper.fm/~pipeline/REAPERVideos/basics/8_Using%20ReaComp%203mb.wmv
Here is a link to some presets [1]