RPR SetMediaTrackInfo Value

From CockosWiki

Revision as of 13:12, 19 November 2009 by MikeLacey (Talk | contribs)
Jump to: navigation, search

Main Page > REAPER Documentation > ReaScript > ReaScript API, Functions > RPR SetMediaTrackInfo Value
Main Page > REAPER Documentation > REAPER API > REAPER API Functions > RPR SetMediaTrackInfo Value

Contents

SetMediaTrackInfo_Value()

bool SetMediaTrackInfo_Value(MediaTrack* tr, const char* parmname, double newvalue)

Set track numerical-value attributes.

  • B_MUTE : bool * : mute flag
  • B_PHASE : bool * : invert track phase
  • IP_TRACKNUMBER : int : track number (returns zero if not found, -1 for master track) (read-only, returns the int directly)
  • I_SOLO : int * : 0=not soloed, 1=solo, 2=soloed in place
  • I_FXEN : int * : 0=fx bypassed, nonzero = fx active
  • I_RECARM : int * : 0=not record armed, 1=record armed
  • I_RECINPUT : int * : record input. 0..n = mono hardware input, 512+n = rearoute input, 1024 set for stereo input pair. 4096 set for MIDI input, if set, then low 5 bits represent channel (0=all, 1-16=only chan), then next 5 bits represent physical input (31=all, 30=VKB)
  • I_RECMODE : int * : record mode (0=input, 1=stereo out, 2=none, 3=stereo out w/latcomp, 4=midi output, 5=mono out, 6=mono out w/ lat comp, 7=midi overdub, 8=midi replace
  • I_RECMON : int * : record monitor (0=off, 1=normal, 2=not when playing (tapestyle))
  • I_RECMONITEMS : int * : monitor items while recording (0=off, 1=on)
  • I_AUTOMODE : int * : track automation mode (0=trim/off, 1=read, 2=touch, 3=write, 4=latch
  • I_NCHAN : int * : number of track channels, must be 2-64, even
  • I_SELECTED : int * : track selected? 0 or 1
  • I_WNDH : int * : current TCP window height (Read-only)
  • I_ISFOLDER : int * : folder status (1=folder, 0=normal, 2=last track in folder)
  • I_FOLDERCOMPACT : int * : folder compacting (only valid on folders), 0=normal, 1=small, 2=tiny children
  • I_MIDIHWOUT : int * : track midi hardware output index (<0 for disabled, low 5 bits are which channels (0=all, 1-16), next 5 bits are output device index (0-31))
  • I_PERFFLAGS : int * : track perf flags (&1=no media buffering, &2=no anticipative FX)
  • I_CUSTOMCOLOR : int * : custom color, windows standard color order (i.e. RGB(r,g,b)|0x100000). if you do not |0x100000, then it will not be used (though will store the color anyway)
  • I_HEIGHTOVERRIDE : int * : custom height override for TCP window. 0 for none, otherwise size in pixels
  • D_VOL : double * : trim volume of track (0 (-inf)..1 (+0dB) .. 2 (+6dB) etc ..)
  • D_PAN : double * : trim pan of track (-1..1)
  • D_PANLAW : double * : pan law of track. <0 for project default, 1.0 for +0dB, etc
  • B_SHOWINMIXER : bool * : show track panel in mixer -- do not use on master
  • B_SHOWINTCP : bool * : show track panel in tcp -- do not use on master
  • B_MAINSEND : bool * : track sends audio to parent
  • B_FREEMODE : bool * : track free-mode enabled (requires UpdateTimeline() after changing etc)
  • C_BEATATTACHMODE : char * : char * to one char of beat attached mode, -1=def, 0=time, 1=allbeats, 2=beatsposonly
  • F_MCP_FXSEND_SCALE : float * : scale of fx+send area in MCP (0.0=smallest allowed, 1=max allowed)
  • F_MCP_SENDRGN_SCALE : float * : scale of send area as proportion of the fx+send total area (0=min allow, 1=max)

Parameters

MediaTrack* tr, 
const char* parmname, 
double newvalue

Returns

bool, 1=ok 0=fail?

Examples

C++



 Perl




 Python




 See Also


 Stuff


Main Page > REAPER Documentation > ReaScript >  ReaScript API, Functions > RPR SetMediaTrackInfo Value

Main Page > REAPER Documentation > REAPER API > REAPER API Functions > RPR SetMediaTrackInfo Value





Retrieved from "https://wiki.cockos.com/wiki/index.php/RPR_SetMediaTrackInfo_Value"