Metronome Settings
From CockosWiki
| Line 22: | Line 22: | ||
*'''Count-In Length (Measures)''' | *'''Count-In Length (Measures)''' | ||
| - | This defines the number of measures a 'Count In' should be. If | + | This defines the number of measures a 'Count In' should be. If the 'Count In' is at the very beginning of a project, then Reaper will wait those number of measures before starting to record. If you select a place to record within a project, Reaper will start the 'count In' the set number of measures before the time that you want to record at. |
*'''Volume''' | *'''Volume''' | ||
| Line 28: | Line 28: | ||
| - | **Secondary Beat Attenuation - This, in relation to the overall volume, the amount of the that secondary beats will be attenuated (or lowered in volume). | + | **Secondary Beat Attenuation - This, in relation to the overall volume, sets the amount of the that secondary beats will be attenuated (or lowered in volume). |
*'''Sample Selection''' | *'''Sample Selection''' | ||
| Line 38: | Line 38: | ||
This is the sample for other beats. (in 4/4, the 2,3,and 4) | This is the sample for other beats. (in 4/4, the 2,3,and 4) | ||
| - | *''' | + | *'''Synthesized''' |
| - | by default, reaper uses a | + | by default, reaper uses a synthesized metronome. The settings below show what frequency in hertz the metronome synthesizer generates. |
*Frequency of First Beat "xx" HZ | *Frequency of First Beat "xx" HZ | ||
*Subsequent Beats "xx" HZ | *Subsequent Beats "xx" HZ | ||
Revision as of 13:01, 20 February 2007
- Enable Metronome
Turns the built-in metronome on or off.
- Metronome Routing
This can route the metronome to a hardware output or other desired metronome routing.
- Enable During Playback
Will turn the metronome on during playback.
- Count-in before playback
Will enable a count-in before playback.
- Enable During Recording
Will turn the metronome on during recording.
- Count-In During Recording
Will enable a count-in before recording
- Count-In Length (Measures)
This defines the number of measures a 'Count In' should be. If the 'Count In' is at the very beginning of a project, then Reaper will wait those number of measures before starting to record. If you select a place to record within a project, Reaper will start the 'count In' the set number of measures before the time that you want to record at.
- Volume
- Metronome Volume - Sets the overall volume of the metronome.
- Secondary Beat Attenuation - This, in relation to the overall volume, sets the amount of the that secondary beats will be attenuated (or lowered in volume).
- Sample Selection
You can also use Samples for your own metronome sounds.
- First Beat Sample
This is the sample for the first beat. (in 4/4, the 1)
- Subsequent Beat
This is the sample for other beats. (in 4/4, the 2,3,and 4)
- Synthesized
by default, reaper uses a synthesized metronome. The settings below show what frequency in hertz the metronome synthesizer generates.
- Frequency of First Beat "xx" HZ
- Subsequent Beats "xx" HZ
- Beat Click Length xx ms
Sets how long each beat click lasts.
