Jesusonic Documentation
From CockosWiki
Contents |
Jesusonic Documentation
The SStillwell JS Collection
These are some of the most interesting and versatile plug-ins available in the Jesusonic Collection.
3x3 - 3-band eq with harmonic enhancement
4x4 - 3-band eq with harmonic enhancement (different style of enhancement)
1175 - Fast-attack compressor, similar in style to a UREI 1176.
autoexpand - Downward expander with program-dependent attack/release.
chorus - What it says
chorus_stereo - What it says
delay_pong - What it says (okay, it's PING-pong, okay? Sheesh.)
delay_tempo - Delay with optional tempo synchronization.
dirtsqueeze - Compressor that adds quite a bit of grit and distortion
drumtrigger - Plugin that generates MIDI trigger from sound input, optionally passing the dry audio signal as well
eventhorizon - non-lookahead limiter that simply rounds off and truncates peaks.
exciter - HF boost/enhancer
expander - Downward expander with manual attack/delay times.
expressbus - Compressor...meant to be used on buss signals.
[fairlychildish] - Emulation of SOME of the features of a Fairchild 670.
flangebaby - Flanger
hpflpf - steep high-pass & low-pass filters in a single plug
hugebooty - LF frequency enhancer...adds upper harmonics to LF content
louderizer - Psychoacoustic loudness enhancer
louderizer_lpf - Psychoacoustic loudness enhancer (with LPF to choose what frequencies are affected)
majortom - Compressor, ala dbx160 VU (old model) or kinda like an LA2A when in Feedback mode.
mastertom - Same as majortom, different algorithm, slightly different sound.
ozzifier - Multi-voice chorus/delay...you'll recognize it.
randomizer - Randomizes midi input...useful for taking signal from drumtrigger and using multiple reasamplomatic instances to trigger multiple snare samples, avoiding machine-gun triggered snare sound.
rbj4eq - 4-band EQ
rbj7eq - 7-band EQ
rbj1073 - 3-band EQ with HPF, same feature choices as Neve 1073.
realoud - Psychoacoustic loudness enhancer, with different algorithm than louderizer.
realoud_lpf - Same relation to realoud as louderizer_lpf is to louderizer
thunderkick - LF enhancer...adds in subharmonics to enhance lowest octaves. Note: does NOT work well with pitched instruments. Mostly useful for kick drum.
volscale - Think of it as a MIDI compressor...scales output volume range and adds/removes gain.
Major Tom
FairlyChildish
The adjustable settings on this compressor are Threshold Bias AGC Time constant Level Detector RMS window.
There are two non-adjustable settings "current comp ratio" and "gain reduction", which move automatically with the program signal.
Here is a rundown of how to use fairlychildish
With the bias set low and the threshold set to *just* catch peaks you get fairly hard ratios (30:1 etc) - and as you lower the threshold, the ratio goes up a LOT - to like 300:1 ... and the sound of the compression gets punchier - which is interesting.
with the bias set high and the threshold just catching the peaks, you get extremely gentle compression, with the ratio fluctuating from around 1.1 to 3:1. As you lower the threshold, the ratio goes up ... to around the 15:1 mark give or take.
Time constant
Time constant affects the attack/release times of the compressor. The Fairchild had some REALLY short attack times (measured in microseconds), and LOOOONG release times (measured in fractions of a MINUTE). The higher the time constant, the longer the attack and release, generally. On "fairlychildish", this setting at higher levels gives some really nice, smooth results - even on the harder compression settings. It is reminiscent of the waves SSL G-comp in this way.
AGC
There are two options for this - Lat/Vert and Left/Right. the Lat/Vert setting on the Fairchild was used when cutting actual masters for vinyl. What it does is switch the level detection and compression from normal stereo to L+R and L-R, reconstituting the normal signals after compression. This allows you to separately compress the center signal (typically bass) from the side signals...a form of Mid/Side compression. The reason it was used on vinyl was to keep the grooves from being cut too wide (lateral) or too deep (vertical).
The level detector rms window slider
When this is set very low, it yields considerably less compression than when it is set high. Setting it high (say, over 1 second) would be interesting for musical compression while setting it low might work for soft limiting.
