Zoom R16 R24
From CockosWiki
Main Page > REAPER Documentation, going quite a lot further
Contents |
Installing, Configuring and Using the Zoom R16 R24 as a Control Surface To Use With REAPER
If you have a control surface such as a Zoom Device, you can use it to control some of REAPER's actions.
The available commands include:
- Track volume (Faders 1-16/24)
- Track mute (Channel buttons)
- Track solo (Channel buttons)
- Arming tracks (Channel buttons)
- Start/Stop replay (Play/Stop)
- Starting/stopping recording (Rec)
- Jog wheel usage for scrubbing
- Jumping to Start (STOP+REW)
- Cycle through markers forward/backward (FF/REW)
- Scroll timeline forward/backward (Left/Right)
- Scroll channel list forward/backward (Up/Down)
- Free usage of F1-F5 keys (see below)
Installation
- Install your Zoom device drivers as normal
- Start Reaper
- Goto Options/Preferences/Control Surfaces
- Choose Mackie Control / Edit
- Set MIDI input/output to Zoom R16/24 Audio Interface
- Leave any other settings as they are
- For playback via R16 turn the Master Poti to "DAW"
DON`T: Choose Zoom R16/24 as MIDI Device under Audio!
You will get annoying errors!
Defining the F1-F5 keys
- Goto Options/Preferences/Keyboard
- Choose "Assign Keyboard shortcuts"
- Search command to be assigned to F-Key
- Click on the chosen command
- Click "Add..." under "Shortcuts for selected action"
- Press desired F-Key
- Click ok
- Repeat for other F-Keys
Using the Channel Buttons for Play/Mute/Rec
- The Master button works as a toggle switch
- All channel buttons change when pressing the Master button
- Active function is displayed
- The Channel LEDs do not work
Changing banks
- The bank buttons select the asigned bank to the faders
- 1-8Tr selects Track 1-8 and assigns tracks to faders
- 9-16Tr selects Track 9-16 and assigns tracks to faders
Known problems
- The channel status LEDs do not work (they work with Mackie Tracktion)
- The R16/24 has to be in DAW mode before starting Reaper
- The bank LEDs do not work
